淘豆網
下載此文檔放大查看縮小查看   1/31
0/100
您的瀏覽器不支持進度條
更多>>該用戶其他文檔
下載所得到的文件列表
UE Procedures in Idle Mode.doc
文檔介紹:
TS C004 V2.1.0 (1999-10)
Technical Specification
CWTS
China Wireless munication Standard
(CWTS);
Working Group 1 (WG1);
UE Procedures in Idle Mode
Contents
1. SCOPE 4
2. REFERENCES 4
3. DEFINITIONS, ABBREVIATIONS AND SYMBOLS 5
3.1 Definitions 5
3.2 Abbreviations 6
3.3 Symbols 6
4. GENERAL DESCRIPTION OF IDLE MODE 7
4.1 Overview 7
4.2 Functional division between AS and NAS in Idle mode 8
4.3 Service type in Idle mode 9
5. PROCESS DESCRIPTIONS 11
5.1 PLMN selection and reselection 11
5.2 Cell selection and reselection 11
5.2.1 Cell Selection Procedure 11
5.2.1.1 Description 11
5.2.1.2 Criteria 12
5.2.2 Immediate Cell evalsuation Procedure 13
5.2.2.1 Description 13
5.2.2.2 Criteria 13
5.2.3 Cell Reselection Procedure 14
5.2.3.1 Description 14
5.2.3.2 Intra-Frequency Cell Reselection Criteria 14
5.2.3.3 Inter-Frequency Cell Reselection Criteria 14
5.2.3.4 Inter Radio Access System Cell Reselection Criteria 14
5.2.3.5 Cell reselection parameters in system information broadcasts 15
5.2.4 ODMA probing sub-process 15
5.2.4.1.1 ODMA probing state machines 15
5.2.5 Barred Cells and Access Control 17
5.2.6 Regional Provision of Service 17
5.3 locations Registration 18
6. BROADCAST INFORMATION RECEIVING 19
6.1 Reception of System Information 19
6.2 Cell Broadcast 19
7. IDLE MODE MEASUREMENTS 19
8. DISCONTINUOUS RECEPTION 20
9. MULTICAST SERVICES 20
9.1 State diagram between the multicast service and DSCH 20
9.1.1 MT_Null State 21
9.1.2 MT_Monitor State 21
9.1.3 MT_Saving State 21
9.1.4 MT_Active State 22
10. EXAMPLES OF PROCEDURES 23
10.1 NAS initiated change of system information 23
10.2 System Information Update to NAS 24
10. originated paging in idle mode 25
10.4 PLMN Selection, automatic mode, normal case 26
10.5 PLMN Reselection, automatic mode 27
10.6 PLMN Reselection, manual mode 28
10.7 PLMN Selection, automatic mode, selected PLMN not found 29
10.8 NAS Controlled Cell Selection 29
10.8.1 Execution in Access Stratum 29
10.8.2 Execution in Non-Access Stratum 30
11. HISTORY 31

Scope
The present document shall describe the overall idle mode process for the UE and the functional division between the non-access stratum and access stratum in the UE. The UE is in idle mode when the connection of the UE is closed on all layers, e.g. there is neither an MM connection nor an RRC connection.
This document presents also examples of inter-layer procedures related to the idle mode processes and describes idle mode functionality of a dual mode TD-SCDMA/GSM UE.
References
The following documents contain provisions which, through reference in this text, constitute provisions of the present document.
References are either specific (identified by date of publication, edition number, version number, etc.) or nonspecific.
For a specific reference, subsequent revisions do not apply.
For a non-specific reference, the latest version appl 內容來自淘豆網www.pxgshyyjh.com轉載請標明出處.
更多>>相關文檔
文檔信息
最近更新
文檔標簽